How to Install a Sliding glass dog door the right way?
Are you thinking about getting a sliding glass dog door? Amazing!
But do you know how to install it the right way?
Don’t worry! This guide will help you to understand how to install your pet’s new door step-by-step.
So let’s get started!
What is the Design of the door?
Does your pet door match the interior and exterior of your home? One simply can’t fix a pet door that has a different design and doesn’t blend in with other elements. Also, there’s a huge variety of pet doors. You can pick the classy one, seamless one, or the one that allows multiple pets to come in or go out of the house.
Locate the Flap
Cut the cardboard piece as a tester at gives a good idea about where you are going to place the flap on your pet’s sliding door. To avoid the disruption between the functionality of the sliding door, try to place the flap on the corner.
Sliding Door Measurements
Before you even think about installing the new Sydney pet doors, it’s crucial to measure it. Consider the area where you want to place it such as a wall or door. Don’t forget to measure your pet and then consider the size of a pet door. If you have a small pet such as a cat or dogs of small breed , consider installing a small pet door and for tall pets, you need to keep those doors pretty tall. In short, the measurements of your door depending on the size of your pet.
Fit in the Panel
Before installing the panel, make sure that you dry-fit it so that any corrections are needed. Dry fitting your panel will help you understand a complete picture of your door and what are the expected changes you need to make.
After that, it’s time to fit that panel in your door. All you have to do is just place the panel on the track and put it in the spot where you want it. Make it stable by twisting the screws on the bottom and position it from the top.
Normally, the panel that comes with sliding pet doors contains a pressure system to the top end from where it enlarges and fits in the track height. Most of the panels don’t need any extra tools to install them. Such panels are suitable for rentals or vacation homes as they can be popped out of the track in case you want to remove them. Once the panel is positioned accurately, tighten the screws and fit it in the spot so that it doesn’t move.
Finalize
You are almost done when you fix that panel on the frame. Give a final touch to the door by installing insulated material that comes with a panel such as weather-stripping . Just be careful during this step and get and you will get a new patio for your pet’s new sliding door.
So follow this guide for the perfect installation of Sliding glass dog door.
Comments
Post a Comment